AGILOX OCF
FOR HEAVIER LOADS
THE AUTONOMOUS COUNTERBALANCED FORKLIFT OCF IS A REAL POWER MONSTER
Features
- Maximum freedom thanks to free lift
- Rotating travel units allow unrestricted freedom of movement
- Safe on the road thanks to powerful sensors
1,600 mm
maximum lifting height
1,450 mm
max. station heightReference: Euro pallet
1,500 kg
maximum lifting weight
1.4 m/s
maximum speed
Specifications
3 omnidirectional
drives
Drive system
Electric
Lift system
LiFePO4 with BMS
3 min charging
= 1 h running
Battery
3,600 kg
Unit weight
< 12 hours (1 vehicle) / 15 minutes (each additional
AMR)
Commissioning time
CE, declaration of
conformity
Certification
125 mm width
70 mm height
Fork dimensions
450 mm min.
950 mm max.
Overall fork width
360° all around protection field
With the new version of obstacle avoidance, it is now also possible to actively avoid obstacles. Monitoring by the sensor system takes place 180° in the main direction of travel, with a radius of approx. 10m, minus the shadows caused by the installation. Upwards, the monitoring range is limited to 1900 mm.
The monitoring of the area close to the ground is limited to 80 mm above the ground in order to be robust against ground unevenness.
Basic Requirements & Driving Surface Design
Industrial floor without steps
Gaps < 5mm
Indoor
Covered, protected outdoor areas
Stacking / unstacking of pallets (also closed)
Direct removal from a rack
Load variants
Euro pallet
Industrial pallet
Euro half pallet
Closed pallet
Custom load carrier
Consulting and Service
As a renowned system and development company, we offer you cost-efficient end-to-end solutions that are tailored to your needs, from consulting and configuration through to the procurement of all required components.